Tongmao Linear Motor is the difference between everyone''''s Kepufufa glass and ordinary glass
time£º2019/10/22 click£º5936
Tongmao Linear Motor is the difference between everyone's Kepufufa glass and ordinary glass. In everyday life, we often hear the concept of floating glass, so what kind of floating glass is there? In which areas is it widely used? What's the difference between it and regular glass? In this issue, Tong Mao's linear motor editor tells everyone that the system has to talk about floating glass.
The so-called floating glass is a flat glass made by a new production process. Including stained glass, floating silver mirrors, floating glass/car windshield, floating glass/various deep processing grades, floating glass/scanner grade, floating glass/coating grade, floating glass/mirror grade, etc.. The application of floating glass is more extensive. According to the knowledge of Tongmao Linear Motor, floating glass can be seen in the construction field, home wear field, precision electronics industry, and office supplies.
The difference between floating glass and ordinary glass is reflected in three major aspects. First, ordinary flat glass and floating glass are flat glass, but the production process and quality are different; The second is that the appearance quality of ordinary flat glass is determined based on the number of defects such as wave bands, bubbles, scratches, sand grains, pimples, and threads. The appearance quality of floating glass is based on the number of defects such as optical deformation, bubbles, inclusions, scratches, lines, and fogs. The third is: ordinary glass, emerald green, fragile, transparency is not high, easy to age and deform under rain exposure. Floating glass, dark green, smooth without ripples on the surface, good perspective, with a certain degree of toughness.
When it comes to floating glass, it is understood that according to the small series of Tongmao linear Motors, the high-performance linear motor gradually penetrates into its intellectual manufacturing process. The molding process of floating glass production is completed in tin slots that are connected to protected gases(N2 and H2). of. The molten glass flows continuously from the pool kiln and floats on the relatively dense tin liquid surface. Under the action of gravity and surface tension, the glass liquid is spread on the tin liquid surface, flattened, formed on the upper and lower surfaces, hardened, and cooled. After being introduced into the transition roller. The roller of the roll table rotates and pulls the glass belt out of the tin trough into the annealing kiln. After annealing and cutting, floating glass products are obtained. In this process, the popular linear motor equipment is used. The linear motor drive system drives the tin liquid in the tin tank to move in the desired direction and speed.
Kunshan Tongmao has been continuously improving the efficiency and productivity of complex manufacturing processes for more than a decade. Its products such as Tongmao linear Motors, linear modules, linear slides, coil Motors, and coil modules have been widely trusted by customers at home and abroad.
This article originated from the original company of Kunshan Tongmao Electronics Co., Ltd.(www.tmmotion.com). Please indicate the source.
Linear motor